If your Accord’s horn sounds if you set up a brand new battery, you need not worry about any mechanical or electrical issues with both the horn or your electrical system. While you reconnect the new battery, you floor the electrical system whenever you attach wires to the negative (black) terminal. By grounding the electrical system, you allow electrical energy to movement to every of the electrical parts of the automotive, together with the horn. If you need to cease your horn from honking everytime you install a brand new battery, merely take away the horn’s fuse from your Accord’s fuse box, thus breaking the circuit. Merely change the fuse when your new battery is installed, and all the pieces shall be in working order.

Honda Accord Horn Comes on While Installing New Batteries Repair Instructions

1. Find the fuse field of your Accord. In all Accords, the fuse field with the horn fuse is located on the motive force’s side of the dashboard, on the edge that’s covered when the door is closed, underneath the steering wheel.
2. Remove the plastic molded overlaying of the fuse box. Depending on the 12 months of your Accord, this molded covering could have a molded deal with to assist in its removal.
3. Locate the fuse dedicated to the horn. Accord fuses are labeled with tiny diagrams or names of the gear they operate. If this diagram is too small to see, scratched off or in any other case absent, consult your proprietor’s handbook for an entire diagram.
4. Take away the fuse and set it apart as you modify battery. This can cut the circuit to the horn, preventing it from sounding as soon as you join the ground wire.
5. Reconnect the fuse when you could have efficiently installed your new battery.